Clock Recovery Unit
CR4201
10G Clock Recovery Unit
Semight Instruments CR4201 is a clock recovery unit used in conjunction with the optical sampling oscilloscopes. Sampling oscilloscopes need a clock to trigger it for eye-diagram testing. When a clock or trigger signal is not provided by the device under test,such as ONT(Optical Network Terminal) or other line-card, CR4201 is the best choice to derive a clock from the data being measured.
CR4201 supports flexible & adaptive data rate range of 1.25 ~ 10.3125 Gbps clock recovery.
Features
Rate Adaptation
1.25~10.3125 Gbps,Single mode multi-mode integrated
Supports both single-mode and multi-mode optical signal clock recoveryHigh sensitivity
Single-mode multi-mode minimum optical power -20dBmAdjustable loop bandwidth
500k~3.5M Adjustable loop bandwidthFeatures and Benefits
Software function
CR4201 has very intuitive and simple interface GUI in which the system can be easily configured.Data range |
1.25~10.3125 Gbps (Self-Adaptive) |
Optical interface | FC/UPC |
Input Power | >-20 dBm |
Output clock division | 1/2, 1/4, 1/8, 1/16 |
Output clock amplitude |
200~600 mV |
Output Impedance | 50 Ω |
Rise/Fall time of Output clock(20%~80%) |
<100 ps |
PLL Bandwidth |
500 kHz/1 MHz/1.5 MHz/2.0 MHz/2.5 MHz/3.0 MHz/3.5 MHz |
Jitter peak to peak |
0.01 dB @ OC-3/ OC-12 0.014 dB @ OC-48/8GFC/OC-192 |
Jitter tolerance | Meet the requirements of standards and specifications |
Output jitter | <4.5mUI @ OC-192 <5mUI @ 8GFC <2.5mUI @ OC-48,12kHz to 20MHz <0.7mUI @ OC-12,12 kHz to 5 MHz <0.2mUI @ OC-3,12 kHz to 1.3 MHz |
Power | LINE:100-240 VAC,50/60 Hz,250 W FUSE:T3.15AL 250 VAC |
Similar recommendation
Service hotline
Follow
Name
Email verfication code
Phone
Password
Confirm Password
e-mail address
Email verification code
New Password
Confirm Password