Job Responsibilities:

Job Requirements:

Job Responsibilities:

1. Responsible for the interface design and code work for the connection between automation equipment and customer EAP system;
2. Responsible for the preparation of external communication manual of automation equipment;
3. Responsible for the specific requirements of SECS/GEM protocol docking with customers;
4. Responsible for the work assigned by superiors, and report the work status to superiors.

Job Requirements:

Job Responsibilities:

Job Requirements:

Job Responsibilities:
1. Responsible for the overall design of semiconductor ATE equipment, including the appearance, process, structure, heat dissipation and mechanism of the equipment;
2. Communication and confirmation of requirements, preparation of detailed design and related documents according to design requirements, confirmation of project plan, completion of the overall scheme design of the product in the early stage, and review and confirmation of the structural scheme;
3. Complete the trial installation, commissioning and review of the prototype, and write relevant technical documents;
4. Communicate and deal with structural design problems, provide technical support for production department;
5. responsible for the continuous improvement of products.

Job Requirements:

1. Bachelor degree or above, major in electronic engineering, mechatronics, mechanical engineering, industrial design, etc.
2. with more than 5 years of work experience, familiar with electronic and communication products, electrical cabinet structure design, material selection and processing technology;
3. Rich experience in product structure design, skilled in using 2D and 3D software to draw product renderings, skilled in EDA common software;
4. electronic product cooling and structural design more than 3 years of work experience is preferred;
5. test equipment industry related experience is preferred;
6. work patience, meticulous, responsible; Able to work under pressure, strong independence and team work spirit.

Job Responsibilities:
1. responsible for the design and development of automated test system software, promote the standardization of Source meter unit test process;
2. responsible for the positioning and analysis of abnormal problems in the product testing process, and assist hardware and software engineers to solve problems;
3. responsible for the product development process, software related test support;
4. Responsible for technical support of client software application and control.

Job Requirements:
1. computer communication, automation and other related majors, familiar with the basic test methods of firmware or software of electronic products;
2. familiar with software testing related processes and testing standards, proficient in the use of various test equipment, strong ability to analyze and solve problems;
3. Good knowledge base of electronic circuit, hardware and software, correct understanding and cognition of test work;
4. Strong ability of automated software development, familiar with LabVIEW or C# language;
5. good communication skills and team spirit, a sense of responsibility and self-drive.

Job Responsibilities:
1. Timely respond to internal/external customers' technical problems, help customers understand Semight source meter products and application solutions, solve instrument selection, operation, application, fault confirmation and other technical problems;
2. Participate in the testing and evaluation of the company's new product development, assist in research and development to improve product design quality;
3. Cooperate with sales team to promote Source meter unit and support marketing activities.

Job Requirements:
1. Electronic engineering or similar major, related industry work experience;
2. 3 years or above work experience, familiar with C, C++, Python and/or LabVIEW programming language is preferred;
3. strong learning willingness and fast learning ability, understanding of Source meter unit or semiconductor test and measurement products and application solutions is preferred;
4. excellent communication skills (language and text, office software), good English reading and writing skills;
5. integrity, sincerity, good team work and pressure resistance.

Job Responsibilities:
1. Evaluate and design wafer aging equipment and related supporting equipment;
2. Evaluate and design wafer burn-in fixtures, including probe cards, high temperature Chuck/ high pressure Chuck;
3. Solve the mechanism related problems in the development and debugging of equipment and fixture;
4. Proficient in 3D and 2D software related to mechanical design;
5. Accept other assignments from the company.Job Requirements:
1. Bachelor degree or above, major in machinery, mechanics, thermodynamics, automation or related;
2. 8 years experience in mechanical design and structural design;
3. Can cooperate with hardware engineers to design PCB board structure, including PCB heat dissipation problems;
4. Have mechanical design experience, need to have structure, hardware, electrical coordination experience;
5. Experience in one or more of the following will be preferred:
    5.1 Experience in stress-strain simulation, thermal simulation, fluid simulation;
    5.2 Experience in semiconductor chip testing, aging equipment and fixture development;
    5.3 Experience in the development of high voltage equipment (over 3000V);
6. Strong innovation ability, good communication and coordination ability, strong learning ability, able to work under certain pressure, with a sense of responsibility and professionalism;
7. Able to work overtime (when the project is urgent) and short-term domestic travel.

Job Responsibilities:
1. Responsible for R&D and design tasks of semiconductor chip test equipment, complete project mechanical design tasks and output BOM table;
2. Responsible for equipment assembly and commissioning, technical support and acceptance during delivery;
3. Coordinate and cooperate with the design communication work of software engineers and electrical engineers;
4. Prepare, change, sort out and update the output data related to the project machinery, and assist in the certification and acceptance of the R & D design project;
5. Cooperate with the Marketing Department to provide and complete the technical support and plan writing in the early stage of the project;
6. Complete other tasks assigned by the leader.
Job Requirements:
1. Bachelor degree or above;
2. 10 years experience in precision microelectronics /3C products/semiconductor testing or related industry, more than 8 years experience in non-standard automation equipment development;
3. Proficient in mechanical principles and design methods; Skilled use of design software; Familiar with the principle of electronic control and the selection of common components, familiar with the working principle of pneumatic components and the selection of common components; Familiar with machining process; Familiar with non-standard automation equipment commonly used standard parts/sensor selection;
4. Integrity, honesty; Good at communication and observation; Work seriously and responsible, rigorous and meticulous, have a good team spirit, self-management ability, with the spirit of excellence/Especially good for innovative spirit;
5. Experience in non-standard automation equipment design in optical communication or semiconductor testing related industries is preferred (chip tester, probe station and other project development experience is preferred).

Job Responsibilities:
1. Proactively identify potential customers and expand business opportunities;
2. Establish a good and stable customer relationship, dig deep into customer needs, and explore opportunities for business growth and improvement;
3. Be familiar with the company's business process, organize and coordinate internal resources, and promote business implementation; Help the company to do a good job in product market positioning and planning;
4. through solid technical ability and excellent service to solve customer problems, complete the sales task set by the team, achieve sales targets;
5. responsible for contract signing related matters and follow up with the receivable.
Job Requirements:
1. Bachelor degree or above, major in electronics, industrial control, communication, instrumentation, measurement and testing;
2. with more than 3-5 years of sales experience, sales experience in instrumentation industry is preferred;
3. optical communication industry background or foreign trade experience is preferred;
4. strong sense of responsibility and initiative, good communication skills, strong affinity;
5. Work location: Suzhou, Wuhan, Shenzhen, Beijing, Chengdu.