BI4201-PD APD TO Burn-In System-Semight Instruments

PD/APD Burn-In&Tester

BI4201-PD

APD TO Burn-In System

TO BI system of Suzhou Semight Instruments can provide PD TO live BI under high temperature conditions and BI voltage range up to 70V, and be compatible with BI modes required by different current sources such as single APD, APD TIA, single PIN, and PIN TIA. BI temperature can be up to 150 ℃, which supports the monitoring and storage of multiple parameters such as current read back monitoring, voltage monitoring, Dark current test before and after BI, BI board temperature monitoring, driver board incoming voltage monitoring, and driver board temperature monitoring in BI process, so as to ensure the integrity of the product monitoring indicators in BI process.

Datasheet

Apply for prototype

Feature

Dual temperature zone
BI of different products can be conducted independently in each temperature zone;
Large capacity
Each temperature zone supports the BI of 1,536 pieces of TO, and 3,072 pieces of TO in total;
Strong compatibility
Compatible with BI monitoring of PIN TIA, single PIN, APD TIA and single APD TO;
Output source type
Support software switching between voltage source and current source;
The monitoring parameters are complete
Including monitoring BI current, forward voltage and backlight current;
Dark current test
Support the dark current test of APD TO before and after BI;
NO EOS
It meets EOS and ESD protection and EHS requirements;
Rich software functions
It supports the door-opening alarm, door-opening power failure and other theft-proof functions;

Functions and advantages

BI4201 test software platform is a configurable platform:
1. The most simple and intuitive workflow, graphical display of data and BI results, support touch operation;
2. The upper and lower temperature zones are completely independent, the in-place detection function of the product is supported. Different BI results are displayed in Different colors for distinguishment;
3. BI configuration is flexible, and BI conditions can be set for each BI board independently, and the BI function can be segmented;
4. Support user permission control, including engineer, technician and operator, the three permission levels;

System function	Overall dimension (mm)	1700L950W2000H
	Support fixture type	Standard 8x8 Fixture
	Number of TO supported by the system	3072 PCS
	System temperature zone	Two independent temperature zones
	Burn-In LD TO	LD Burn-In, MPD monitoring, LIV scanning
	Monitoring parameters	In constant current mode: Provide BI current, read back BI current and sample voltage; In constant voltage mode: Provide BI voltage, read back BI voltage and sample current;
	Pin switching	Support the definition and switching of different device software pins
	MES system interface	Support customized development of MES system and database for docking customers
	Data saving	Save the original test data, calculation results and detailed log of system operation
	System power supply	380V，11KW(Full load)
Temperature control	Temperature range	Normal temperature to 180 ℃

Similar recommendation

Optical Network Test

Optical communication network plays an important role in the rapid development of big data, cloud computing, 5G communication and other markets.
Semight Instruments offers various of instruments for optical Transceiver/Component testing, including wide bandwidth sampling oscilloscope, NRZ/PAM4 bit error ratio tester , burst error ratio tester, fast wavelength meter, optical spectrum analyzer, high precise source measure unit, 400G network analyzer ,optical power meter, optical attenuator, optical switch etc. Provide cost-effective complete solutions.

Details

Electrical Performance Test

The high-precision source meter integrates the functions of voltage source, current source, voltmeter, ampere meter, and electronic load in one, which is widely used in high-precision IV test and measurement for various discrete components, photovoltaic, new energy, battery and other industries. Semight Instrument provides high-precision benchtop source meters and plug-in PXIe source meter modules of standard PXIe chassis, fully meeting the application of various test scenarios.

Details

Optical Chip Test

Burn-in testing of laser is an important method to ensure the reliability of laser. Through the test of COC or bare die, the early failure of laser caused by the defects in the process of laser production can be screened out in advance. Semight Instrument provides a complete solution from bare die to COC, from high temperature(150℃ or higher) to low temperature (-40℃), with CoC automatic loading and unloading system, forming a complete test solution, Semight Instrument's laser chip burn-in/load/unload test system has been widely recognized by the market.

Details

Power Chip Test

The semiconductor front-end test is mainly used in the wafer processing to check whether the processing parameters of the wafer products meet the design requirements or there are defects affecting the yield after each step of the manufacturing process. The semiconductor back-end test equipment is mainly used after wafer processing to check whether the performance of the chip meets the requirements, which belongs to the electrical performance test. Semight Instrument provide integrated solutions such as wafer burn in and known good die tester, improve test efficiency and reduce test cost.

Details

Site Map