Site Map

Site Map

Laser Diode Test

CT6206

High Power Laser Test System


Semight Instruments High Power Laser Test System CT6206 supports the continuous or pulse mode with a current range of 10A. CT6206 is a very flexible test platform that supports CoC, CoS, CoB or TO packages, covering optical communications, industry, 3D sensors, laser radar and other applications.

CT6206 and BI6206 high-power laser BI systems share a test fixture board for automatic fixture loading and unloading, and support batch test and parallel test. It provides a very efficient platform for the mass production of high-power semiconductor lasers.

Feature

  • Good compatibility

    Share a test fixture with BI6206 high power laser BI system;
  • High test efficiency

    Support batch input and output;
    four test platforms for parallel testing;
  • Good repeatability

    High repeatability of optical measurement;
    High wavelength measurement repeatability;
    Supporting near-field and far-field test optional;
  • Support industrial low temperature

    Low temperature - 40℃ test optional;

Functions and advantages

  • System functions and advantages

    4 test seat in parallel increases test efficiency
    Suitable for ocean optical spectrometer, which can test visible light wavelength
    Single fixture temperature control, good repeatability of test data
System parameter Chip type All high power COC / COS lasers
Fixture type

Compatible with BI6206 BI system fixture 

Fixture loading and unloading

Automatic fixture loading and unloading 

Fixture ID scanning identification

Automatic fixture Barcode scanning recognition 

Parallel testing COC fixture double side parallel test
Standard sample control The software supports the standard sample control function. If the standard sample is tested on this machine for more than a time period (configurable), the system will automatically alarm
Test machine control The software supports the control function of the test machine. If the same fixture is tested on different test machines before and after aging, the software will automatically generate an alarm prompt.
Test configuration control The software supports test configuration management and control, including test instrument, test algorithm, test sequence, test result judgment, etc.
Test data Support all test data required by users / support MES related requirements
Electrical SMU type

Precision source meter

Direct current 3A
I / V source resolution

500nA/100mV

I/V Measurement resolution

500nA/100mV

Voltage range 70V
Pulse current 10A
EOS No EOS (under any normal operation and use conditions)
Optical Type of optical power measurement detector InGaAs
Optical power wavelength range 1200-1700nm(expandable to 700 ~ 1700nm)
Optical power measurement range 5mW-5000W
Optical power measurement accuracy <0.2dB

Optical spectrum measurement range

Integrated Yokogawa AQ6360 or other spectrometers

Optical spectrum measurement accuracy

Optical power coupling efficiency Coupling power > - 15dBm @ spectral measurement
Temperature

Temperature control method

TEC+Water cooling system

Temperature area

4 independent temperature control areas
Temperature range 25-100℃
Temperature change speed (heating / cooling) 8℃/min
Temperature resolution 0.1℃
Temperature accuracy <±0.5℃
Temperature consistency <±0.5℃
Temperature stability <±0.1℃
Test parameters Ith Repeatability ±1%
Power repeatability ±2%
SE Repeatability ±2%
VF Repeatability ±3%
Wavelength repeatability <±0.1nm
SMSR Repeatability <2.5dB

Similar recommendation

Optical Network Test
Optical Network Test

Optical communication network plays an important role in the rapid development of big data, cloud computing, 5G communication and other markets.
Semight Instruments offers various of instruments for optical Transceiver/Component testing, including wide bandwidth sampling oscilloscope, NRZ/PAM4 bit error ratio tester , burst error ratio tester, fast wavelength meter, optical spectrum analyzer, high precise source measure unit, 400G network analyzer ,optical power meter, optical attenuator, optical switch etc. Provide cost-effective complete solutions.

Details
Electrical Performance Test
Electrical Performance Test

The high-precision source meter integrates the functions of voltage source, current source, voltmeter, ampere meter, and electronic load in one, which is widely used in high-precision IV test and measurement for various discrete components, photovoltaic, new energy, battery and other industries. Semight Instrument provides high-precision benchtop source meters and plug-in PXIe source meter modules of standard PXIe chassis, fully meeting the application of various test scenarios.

Details
Optical Chip Test
Optical Chip Test

Burn-in testing of laser is an important method to ensure the reliability of laser. Through the test of COC or bare die, the early failure of laser caused by the defects in the process of laser production can be screened out in advance. Semight Instrument provides a complete solution from bare die to COC, from high temperature(150℃ or higher) to low temperature (-40℃), with CoC automatic loading and unloading system, forming a complete test solution, Semight Instrument's laser chip burn-in/load/unload test system has been widely recognized by the market.

Details
Power Chip Test
Power Chip Test

The semiconductor front-end test is mainly used in the wafer processing to check whether the processing parameters of the wafer products meet the design requirements or there are defects affecting the yield after each step of the manufacturing process. The semiconductor back-end test equipment is mainly used after wafer processing to check whether the performance of the chip meets the requirements, which belongs to the electrical performance test. Semight Instrument provide integrated solutions such as wafer burn in and known good die tester, improve test efficiency and reduce test cost.

Details
After login Download Now!

account number

password

Registered account Download Now!

full name

Please enter your name *

e-mail address

Please enter your email address *

Email verification code

Please enter your email verification code

Telephone

Please enter your contact number *

password

Please enter your login password *

Confirm Password

Please enter your login password again *
Retrieve password

e-mail address

Please enter your email number *

Email verification code

Please enter your email verification code

New Password

Please enter your login password *

Confirm Password

Please enter your login password again *